CEMSA >详细信息
刀闸阀()
Knife gate valve
发布时间:2019年04月01日 浏览次数:
+ . -

北京时时彩投注技巧适用工况:在冶金行业的矿料输送环节,经常需要对管道中的矿料介质进行截断或放料操作。阀门关断后,阀门前后压差能够达到10.0MPa,物料在阀腔容成堆积,容易出现阀门密封不严或阀芯被物料冲刷破坏等故障。

Applicable conditions: In the transportation of mineral materials in the metallurgical industry, it is often necessary to cut off or discharge the mineral media in the pipeline. After the valve is turned off, the pressure difference between the front and the back of the valve can reach 10.0 MPa, and the material is piled up in the valve cavity, which is prone to failure of the valve seal or the valve core being damaged by material flushing.

北京时时彩投注技巧结构特点:Structure characteristic                              

★双向零泄漏切断,任意方向安装

Two-way zero leakage shut-off, can be installed in any direction;

北京时时彩投注技巧★可靠的填料密封,无外漏

北京时时彩投注技巧Reliable packing seal, no external leakage;

北京时时彩投注技巧★自清洁,阀门滑动流畅, 操作轻松

北京时时彩投注技巧Self-cleaning, smooth valve sliding, easy operation;

北京时时彩投注技巧★闸板周侧密封,操作推力小

北京时时彩投注技巧★The side of the ram is sealed and the operating thrust is small;

★ 结构牢固,紧凑,安装方便

★ Structure is firm, compact and easy to install;

★耐磨损,寿命长,维护方便

★ wear-resistant, long life and easy maintenance;

北京时时彩投注技巧★卡嵌阀座,不受物料冲刷

北京时时彩投注技巧★The embedded seat is not subject to material scouring;

★行程导向,闸板启闭稳定

★Stroke guide, disc opening and closing of stable